Smart-technologies ID422w Manuel d'utilisateur télécharger pdf (Page 27)

17 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w

Matching the Resolution

Before the image output of the computer can display properly on the interactive

screen, you must set the computer’s resolution to the interactive screen’s

native resolution.

Set the resolution of the display to 1920 × 1080 pixels (full HD) and set the refresh

rate to between 56 Hz and 76 Hz.

IMPORTANT

Do not set the Refresh Rate to higher than 76 Hz.

If the Refresh Rate is higher than 76 Hz, you see a black screen.

NOTES

• If you need to change the display settings on the computer, you must use

the mouse.

• This procedure may vary depending on the version of your operating system,

and your system preferences.

• Some Mac computers transmit video signals outside the 56 Hz to 76 Hz

synchronization range. These models should not be used with the

SMART Podium ID422w.

To set the resolution

(Windows computers)

1. Open the Windows Control Panel.

2. Click Display.

The Display Properties dialogue box appears.

3. Click the Settings tab.

4. Move the slider to 1920 × 1080.

5. Click OK.

To set the resolution

(Mac computers)

1. Select Apple menu > System Preferences > Displays.

2. On the Display tab, select 1920 × 1080.

3. Close the dialog box.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Pas de commentaire

Smart-technologies ID422w Manuel d'utilisateur Page 27